Skip to content

Tools is made by Valley.

See how ↗

Tools is made by Valley.

See how ↗

Tools is made by Valley.

See how ↗

Free tool · 04 / SEND

Email header analyzer.Why an email landed where it did, in seconds, no signup.

Reads an email's headers: whether SPF, DKIM and DMARC passed, its route and each delay.

Runs in your browser. Nothing you type is sent to us.

The example is made up. Headers carry addresses and IPs, so they stay in your browser.

Where do I find the headers?
  • Gmail: open the email, click More next to Reply, choose Show original, then Copy to clipboard.
  • New Outlook and Outlook on the web: More actions, then View, then View message details.
  • Classic Outlook: open the email in its own window, then File, then Properties, and copy the Internet headers box.
  • Apple Mail: View, then Message, then All Headers.

SPF pass, DKIM pass, DMARC pass.

From
Jane Doe <jane@example.com>
Subject
Quick question about your onboarding emails
Sent
Tue, 3 Nov 2026 17:14:00 +0000
Checked by
mx.example.org

Authentication

  • SPFpass

    The sending server is allowed to send for this domain.

    Checked for example.com, which matches the From domain example.com.

  • DKIMpass

    The signature checked out: the signed parts weren't changed after sending.

    Signed by example.com, which matches the From domain example.com.

  • DMARCpass

    DMARC passed: the message is authenticated for the domain in its From address.

    For the From domain example.com.

Route: 3 hops, 6 s in total

  1. 1

    laptop.example.com ([198.51.100.7]) → mail.example.com

    ESMTPSA · Tue, 03 Nov 2026 17:14:01 +0000

    start
  2. 2

    mail.example.com (mail.example.com. [192.0.2.10]) → mx.example.org

    ESMTPS · Tue, 03 Nov 2026 09:14:05 -0800 (PST)

    4 s
  3. 3

    ? → 2002:a05:6a10:1234

    SMTP · Tue, 3 Nov 2026 09:14:07 -0800 (PST)

    2 s

Read from the first server to the last: each server adds its line at the top, so the bottom one came first.

All 12 headers
Every header in the message, in order
Delivered-Tosam@example.org
Receivedby 2002:a05:6a10:1234 with SMTP id x9csp123456pxb; Tue, 3 Nov 2026 09:14:07 -0800 (PST)
Authentication-Resultsmx.example.org; dkim=pass header.i=@example.com header.s=s1 header.b=AbCdEf12; spf=pass (example.org: domain of jane@example.com designates 192.0.2.10 as permitted sender) smtp.mailfrom=jane@example.com; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=example.com
Receivedfrom mail.example.com (mail.example.com. [192.0.2.10]) by mx.example.org with ESMTPS id a1si123456qkb.42.2026.11.03.09.14.05 for <sam@example.org>; Tue, 03 Nov 2026 09:14:05 -0800 (PST)
DKIM-Signaturev=1; a=rsa-sha256; c=relaxed/relaxed; d=example.com; s=s1; h=from:to:subject:date:message-id; bh=47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=; b=AbCdEf12
Receivedfrom laptop.example.com ([198.51.100.7]) by mail.example.com with ESMTPSA id 7f3c2b; Tue, 03 Nov 2026 17:14:01 +0000
FromJane Doe <jane@example.com>
ToSam Lee <sam@example.org>
SubjectQuick question about your onboarding emails
DateTue, 3 Nov 2026 17:14:00 +0000
Message-ID<0a1b2c3d@mail.example.com>
Return-Path<jane@example.com>

Valley sends from your own Gmail or Microsoft inbox, so the checks you just read are your own domain's. See how Valley does it ↗

Built by Valley ↗

NEXT STEP

Fed up with emails that pass every check and still get no reply.The other half is who, and what you say.

Book a demo ↗

$500 a month for your first seat, $200 for each seat after that.

Reading the results

How do I read email headers?What each SPF, DKIM and DMARC result means.

Find the Authentication-Results line near the top: it says whether SPF, DKIM and DMARC passed, and the server that checked adds it. Then read the Received lines from the bottom up to follow the route, because each server adds its line at the top. This tool does both, and says what each result means.

SPF, DKIM and DMARC results in email headers, and what each means
CheckResultWhat it means
SPFpassThe sending server is allowed to send for this domain.
SPFsoftfailThe domain says this server probably isn't allowed to send for it.
SPFfailThe domain says this server isn't allowed to send for it.
SPFneutralThe domain doesn't say either way whether this server may send for it.
SPFnoneNo SPF record was found for the domain.
DKIMpassThe signature checked out: the signed parts weren't changed after sending.
DKIMfailThere's a signature, but it didn't verify.
DKIMnoneThe message wasn't signed.
DMARCpassDMARC passed: the message is authenticated for the domain in its From address.
DMARCfailDMARC failed: neither SPF nor DKIM passed for the domain in its From address.
DMARCnoneThe sending domain has no DMARC record.
DMARCbestguesspassNo DMARC record, but Microsoft judged it would have passed if there were one.

In our words, from RFC 7208 (SPF), RFC 8601 (DKIM) and Microsoft's anti-spam headers page (DMARC, including Microsoft's bestguesspass).

From RFC 7208: Sender Policy Framework, section 2.6 (results) ↗ · RFC 8601: Message header field for indicating message authentication status ↗ · Microsoft Learn: Anti-spam message headers ↗, read 3 Nov 2026

How it works

How this tool works.And what it can't see.

Paste an email's full headers. The analyzer joins folded lines, lists every header, and reads the topmost Authentication-Results, the one the receiving side adds, for SPF, DKIM, DMARC and, from Microsoft 365, compauth. Everything runs in your browser, and nothing you paste is sent to us.

It checks whether the domain SPF checked and the domain DKIM signed for are the same as, or part of, the From domain. That's a rough guide to DMARC alignment; the DMARC result itself is the receiver's word.

It reads the Received lines from the bottom up, since each server adds its own at the top, and works out how long each hop took from their timestamps. Clocks on different servers can disagree, so a small negative delay is usually a clock, not time travel.

From Microsoft 365 headers it also reads CAT, SFV, SCL and BCL, with Microsoft's own meanings. What it can't see is anything the receiving server didn't write into the headers.

Built by Valley.

Sources

Email headers

What email headers tell you.And where to find them.

Five things worth knowing before you read a header.

  1. 01

    Where to find the full headers

    In Gmail, open the email, click More next to Reply and choose Show original, then Copy to clipboard. In new Outlook and Outlook on the web, choose More actions, then View, then View message details. In classic Outlook, open the email, then File, then Properties: the headers are in the Internet headers box.

    From Gmail Help: Trace an email with its full header ↗ · Microsoft Support: View internet message headers in Outlook ↗, read 3 Nov 2026

  2. 02

    Read the Received lines from the bottom up

    Every server that takes the message must add a Received line at the beginning, and must not reorder the others. So the bottom line is the first server and the top line is the last, and the timestamps between them show where the time went.

    From RFC 5321: Simple Mail Transfer Protocol, section 4.4 (trace information) ↗, read 3 Nov 2026

  3. 03

    Authentication-Results is the receiver's verdict

    Servers that run authentication checks add an Authentication-Results field at the top of the message, naming themselves first. The topmost one is the receiving side's, and it's the one that counts for where the message landed.

    From RFC 8601: Message header field for indicating message authentication status ↗, read 3 Nov 2026

  4. 04

    SPF softfail or fail

    Fail is the domain's explicit statement that the server isn't allowed to send for it; softfail is a weaker statement that it probably isn't. Microsoft ties them to the end of the SPF record: -all asks receivers to reject, ~all to accept and mark.

    From RFC 7208: Sender Policy Framework, section 2.6 (results) ↗ · Microsoft Learn: Anti-spam message headers ↗, read 3 Nov 2026

  5. 05

    Microsoft 365: read CAT, not SCL

    Microsoft 365 stamps a spam confidence level, SCL, but says that in its cloud SCL no longer decides whether a message is treated as spam or what happens to it. The CAT value shows what filtered the message, such as SPM for spam or BULK for bulk mail, and SFV the spam filter's verdict.

    Passing every check proves who sent an email, not that anyone wanted it. See how Valley does it ↗

    From Microsoft Learn: Spam confidence level (SCL) ↗ · Microsoft Learn: Anti-spam message headers ↗, read 3 Nov 2026

Questions

Questions people ask.

How do I read email headers?
Start with Authentication-Results near the top for SPF, DKIM and DMARC, then read the Received lines from the bottom up to follow the route. Paste them above and the tool does both.
How do I view full email headers in Gmail?
Open the email, click More next to Reply, choose Show original, and click Copy to clipboard.
How do I view email headers in Outlook?
In new Outlook or Outlook on the web, choose More actions, then View, then View message details. In classic Outlook, open the email, then File, then Properties.
What does SPF softfail mean?
The domain says the sending server probably isn't allowed to send for it: a weaker statement than fail. It usually comes from an SPF record ending in ~all.
What does DKIM none mean?
The message wasn't signed with DKIM, so there was nothing to verify.
What does dmarc=bestguesspass mean?
It's Microsoft's result for a domain with no DMARC record, where the message would have passed if there were one.
What is SCL in an email header?
Microsoft 365's spam confidence level, from -1 to 9. Microsoft says it no longer decides spam handling in its cloud; the CAT value shows what filtered the message.
Why did my email go to spam if SPF, DKIM and DMARC passed?
Authentication proves who sent it, not that the recipient wanted it. Filters weigh more than these checks, so look at the email itself too; our email spam checker flags what in the copy draws attention.
Is it safe to paste email headers here?
Yes. The analyzer runs in your browser, and nothing you paste is sent to us or stored.