# Email header analyzer

> Reads an email's headers: whether SPF, DKIM and DMARC passed, its route and each delay. Free, no signup. Runs in your browser. Nothing you type is sent to us.

**Email header analyzer. Why an email landed where it did, in seconds, no signup.** Use it at https://tools.joinvalley.co/email-header-analyzer

## How do I read email headers? What each SPF, DKIM and DMARC result means.

Find the Authentication-Results line near the top: it says whether SPF, DKIM and DMARC passed, and the server that checked adds it. Then read the Received lines from the bottom up to follow the route, because each server adds its line at the top. This tool does both, and says what each result means.

| Check | Result | What it means |
| --- | --- | --- |
| SPF | pass | The sending server is allowed to send for this domain. |
| SPF | softfail | The domain says this server probably isn't allowed to send for it. |
| SPF | fail | The domain says this server isn't allowed to send for it. |
| SPF | neutral | The domain doesn't say either way whether this server may send for it. |
| SPF | none | No SPF record was found for the domain. |
| DKIM | pass | The signature checked out: the signed parts weren't changed after sending. |
| DKIM | fail | There's a signature, but it didn't verify. |
| DKIM | none | The message wasn't signed. |
| DMARC | pass | DMARC passed: the message is authenticated for the domain in its From address. |
| DMARC | fail | DMARC failed: neither SPF nor DKIM passed for the domain in its From address. |
| DMARC | none | The sending domain has no DMARC record. |
| DMARC | bestguesspass | No DMARC record, but Microsoft judged it would have passed if there were one. |

In our words, from RFC 7208 (SPF), RFC 8601 (DKIM) and Microsoft's anti-spam headers page (DMARC, including Microsoft's bestguesspass).

Sources: [RFC 7208: Sender Policy Framework, section 2.6 (results)](https://www.rfc-editor.org/rfc/rfc7208#section-2.6) (read 2026-11-03), [RFC 8601: Message header field for indicating message authentication status](https://www.rfc-editor.org/rfc/rfc8601) (read 2026-11-03), [Microsoft Learn: Anti-spam message headers](https://learn.microsoft.com/en-us/defender-office-365/message-headers-eop-mdo) (read 2026-11-03)

## How it works

Paste an email's full headers. The analyzer joins folded lines, lists every header, and reads the topmost Authentication-Results, the one the receiving side adds, for SPF, DKIM, DMARC and, from Microsoft 365, compauth. Everything runs in your browser, and nothing you paste is sent to us.

It checks whether the domain SPF checked and the domain DKIM signed for are the same as, or part of, the From domain. That's a rough guide to DMARC alignment; the DMARC result itself is the receiver's word.

It reads the Received lines from the bottom up, since each server adds its own at the top, and works out how long each hop took from their timestamps. Clocks on different servers can disagree, so a small negative delay is usually a clock, not time travel.

From Microsoft 365 headers it also reads CAT, SFV, SCL and BCL, with Microsoft's own meanings. What it can't see is anything the receiving server didn't write into the headers.

## What email headers tell you. And where to find them.

Five things worth knowing before you read a header.

### Where to find the full headers

In Gmail, open the email, click More next to Reply and choose Show original, then Copy to clipboard. In new Outlook and Outlook on the web, choose More actions, then View, then View message details. In classic Outlook, open the email, then File, then Properties: the headers are in the Internet headers box.

Sources: [Gmail Help: Trace an email with its full header](https://support.google.com/mail/answer/29436?hl=en) (read 2026-11-03), [Microsoft Support: View internet message headers in Outlook](https://support.microsoft.com/en-us/office/view-internet-message-headers-in-outlook-cd039382-dc6e-4264-ac74-c048563d212c) (read 2026-11-03)

### Read the Received lines from the bottom up

Every server that takes the message must add a Received line at the beginning, and must not reorder the others. So the bottom line is the first server and the top line is the last, and the timestamps between them show where the time went.

Sources: [RFC 5321: Simple Mail Transfer Protocol, section 4.4 (trace information)](https://www.rfc-editor.org/rfc/rfc5321#section-4.4) (read 2026-11-03)

### Authentication-Results is the receiver's verdict

Servers that run authentication checks add an Authentication-Results field at the top of the message, naming themselves first. The topmost one is the receiving side's, and it's the one that counts for where the message landed.

Sources: [RFC 8601: Message header field for indicating message authentication status](https://www.rfc-editor.org/rfc/rfc8601) (read 2026-11-03)

### SPF softfail or fail

Fail is the domain's explicit statement that the server isn't allowed to send for it; softfail is a weaker statement that it probably isn't. Microsoft ties them to the end of the SPF record: -all asks receivers to reject, ~all to accept and mark.

Sources: [RFC 7208: Sender Policy Framework, section 2.6 (results)](https://www.rfc-editor.org/rfc/rfc7208#section-2.6) (read 2026-11-03), [Microsoft Learn: Anti-spam message headers](https://learn.microsoft.com/en-us/defender-office-365/message-headers-eop-mdo) (read 2026-11-03)

### Microsoft 365: read CAT, not SCL

Microsoft 365 stamps a spam confidence level, SCL, but says that in its cloud SCL no longer decides whether a message is treated as spam or what happens to it. The CAT value shows what filtered the message, such as SPM for spam or BULK for bulk mail, and SFV the spam filter's verdict.

Passing every check proves who sent an email, not that anyone wanted it. [Valley](https://www.joinvalley.co/?utm_source=tools_suite)

Sources: [Microsoft Learn: Spam confidence level (SCL)](https://learn.microsoft.com/en-us/defender-office-365/anti-spam-spam-confidence-level-scl-about) (read 2026-11-03), [Microsoft Learn: Anti-spam message headers](https://learn.microsoft.com/en-us/defender-office-365/message-headers-eop-mdo) (read 2026-11-03)

## Sources

- [RFC 8601: Message header field for indicating message authentication status](https://www.rfc-editor.org/rfc/rfc8601) (read 2026-11-03)
- [RFC 7208: Sender Policy Framework, section 2.6 (results)](https://www.rfc-editor.org/rfc/rfc7208#section-2.6) (read 2026-11-03)
- [RFC 5321: Simple Mail Transfer Protocol, section 4.4 (trace information)](https://www.rfc-editor.org/rfc/rfc5321#section-4.4) (read 2026-11-03)
- [Microsoft Learn: Anti-spam message headers](https://learn.microsoft.com/en-us/defender-office-365/message-headers-eop-mdo) (read 2026-11-03)
- [Microsoft Learn: Spam confidence level (SCL)](https://learn.microsoft.com/en-us/defender-office-365/anti-spam-spam-confidence-level-scl-about) (read 2026-11-03)
- [Gmail Help: Trace an email with its full header](https://support.google.com/mail/answer/29436?hl=en) (read 2026-11-03)
- [Microsoft Support: View internet message headers in Outlook](https://support.microsoft.com/en-us/office/view-internet-message-headers-in-outlook-cd039382-dc6e-4264-ac74-c048563d212c) (read 2026-11-03)

## Questions people ask

### How do I read email headers?

Start with Authentication-Results near the top for SPF, DKIM and DMARC, then read the Received lines from the bottom up to follow the route. Paste them above and the tool does both.

### How do I view full email headers in Gmail?

Open the email, click More next to Reply, choose Show original, and click Copy to clipboard.

### How do I view email headers in Outlook?

In new Outlook or Outlook on the web, choose More actions, then View, then View message details. In classic Outlook, open the email, then File, then Properties.

### What does SPF softfail mean?

The domain says the sending server probably isn't allowed to send for it: a weaker statement than fail. It usually comes from an SPF record ending in ~all.

### What does DKIM none mean?

The message wasn't signed with DKIM, so there was nothing to verify.

### What does dmarc=bestguesspass mean?

It's Microsoft's result for a domain with no DMARC record, where the message would have passed if there were one.

### What is SCL in an email header?

Microsoft 365's spam confidence level, from -1 to 9. Microsoft says it no longer decides spam handling in its cloud; the CAT value shows what filtered the message.

### Why did my email go to spam if SPF, DKIM and DMARC passed?

Authentication proves who sent it, not that the recipient wanted it. Filters weigh more than these checks, so look at the email itself too; our email spam checker flags what in the copy draws attention.

### Is it safe to paste email headers here?

Yes. The analyzer runs in your browser, and nothing you paste is sent to us or stored.

## Related tools

- [SPF, DKIM and DMARC checker](https://tools.joinvalley.co/spf-dkim-dmarc-checker): Checks a domain's SPF, DKIM and DMARC records against Gmail and Yahoo's sender rules.
- [MX lookup](https://tools.joinvalley.co/mx-lookup): Shows a domain's MX records and who handles its email, for one domain or 500 at once.
- [Email spam checker](https://tools.joinvalley.co/email-spam-checker): Scores a cold email out of 100 and flags links, money signs, em dashes and merge tags.
- [Email signature generator](https://tools.joinvalley.co/email-signature-generator): Makes an email signature for Gmail or Outlook, plus a plain one for cold email.
- [Cold email domain finder](https://tools.joinvalley.co/cold-email-domain-finder): Sending domain ideas close to your brand, each checked against its registry.

## Next step

Want replies, not just clean copy? Valley finds buyers showing real buying signals and messages them across email and LinkedIn. [Valley](https://www.joinvalley.co/?utm_source=tools_suite)

Shelf: [04 Email outreach](https://tools.joinvalley.co/email-outreach)

---

Tools by Valley, made by [Valley](https://www.joinvalley.co/?utm_source=tools_suite). HTML version: https://tools.joinvalley.co/email-header-analyzer
